Thermal Protector - Bissell 2513 Series User Manual

Thermal Protector

An internal thermal protector has been designed into your carpet cleaner to
protect it from overheating. When the thermal protector activates, the suction
motor will stop operating. If this happens proceed as follows:
1
Turn the cleaner OFF.
3
Check the end of the hose and tool
for blockages and remove if necessary.
Check the float stack for clogs and
remove debris.
NOTE: If the thermal protector continues to activate after following the above
steps, your cleaner may need servicing. Call BISSELL® Consumer Care or visit
the website.
2
Unplug cleaner from the electrical outlet.
4
Let the motor cool for approximately
30 minutes. The thermal protector will
automatically reset and cleaning may
continue once plugged back in.
www.BISSELL.com
13