Blind-Spot Collision Warning (Bcw)/Blind-Spot Collision-Avoidance Assist (Bca) System; Blind-Spot Collision Warning (Bcw) - Kia 2020 Telluride Owner's Manual

Driving your vehicle
CAUTION
The Driver Attention Warning sys-
tem may not provide alerts in the
following situations:
Not properly recognize lane. (For
more information, refer to "Lane
Keeping Assist (LKA) system" on
page 5-100.)
Rough or intentionally evasive
driving (road construction, nearby
vehicles, falling object, bump in
the road, etc.).
When the driving performance of
the vehicle deteriorates (Large
tire pressure deviation, uneven
wear, poor wheel alignment, etc.).
Severe winding road.
Uneven road surface condition.
Windy road.
The vehicle drives through a
windy area.
The vehicle is controlled by the
following driver assistance sys-
tems:
- Lane Keeping Assist (LKA) sys-
tem
- Forward Collision-Avoidance
Assist (FCA) system.
- Smart Cruise Control (SCC) sys-
tem
- Blind-Spot Collision-Avoidance
Assist (BCA) system
- Lane Following Assist (LFA) sys-
tem
- Highway Driving Assist (HDA)
system
Blind-Spot Collision Warning (BCW)/Blind-Spot
Collision-Avoidance Assist (BCA) system
Blind-Spot Collision Warning
(BCW)/Blind-Spot Collision-
Avoidance Assist (BCA) system
The Blind-Spot Collision Warning
(BCW)/Blind-Spot Collision-Avoid-
ance Assist (BCA) detects approach-
ing vehicles in the blind-spot and
warns the driver.

Blind-Spot Collision Warning (BCW)

The BCW uses radar sensors in the
rear bumper to monitor and warn
the driver of an approaching vehicle
in the driver's blind spot area.
The system monitors the rear area
of the vehicle and provides informa-
tion to the driver with an audible
alert and a indicator on the outside
rearview mirrors.
1) Blind-spot area
OON058042NR
The blind spot detection range var-
ies relative to vehicle speed.
Note that if your vehicle is traveling
much faster than the vehicles
5
5 111