Kia 2020 Telluride Owner's Manual page 355

Driving your vehicle
Canceled manually
OON058036NR
The SCC is temporarily canceled
when the brake pedal is depressed
or the CANCEL button is pressed.
Depress the brake pedal and press
the CANCEL button at the same
time, when the vehicle is at a stand-
still. The speed and vehicle to vehicle
distance indicator on the cluster is
disappeared and the CRUISE indica-
tor is illuminated continuously.
Canceled automatically
The SCC will automatically cancel in
the following situations. (the set
speed and vehicle to vehicle distance
on the LCD display will go off.)
The driver's door is opened.
The shift lever is shifted to N
(Neutral), R (Reverse) or P (Park-
ing).
The Electronic Parking Brake
(EPB) is applied.
The vehicle speed is over 110 mph
(170 km/h).
Smart Cruise Control (SCC) with Stop & Go
The ESC, ABS or Traction Control
System (TCS) is operating.
The ESC is turned off.
The sensor or the cover is dirty or
blocked with foreign matter.
When the vehicle is stopped for
over 5 minutes.
The vehicle stops and goes
repeatedly for a long period of
time.
The accelerator pedal is continu-
ously depressed for more than
one minute.
The engine performance is abnor-
mal.
Engine rpm is in the red zone.
The driver starts driving by push-
ing the toggle switch up (RES+)/
down (SET-) or depressing the
accelerator pedal, approximately
after the vehicle is stopped by the
Smart Cruise Control system with
no other vehicle ahead.
The driver starts driving by push-
ing the toggle switch up (RES+)/
down (SET-) or depressing the
accelerator pedal, approximately
after stopping the vehicle with a
vehicle stopped far away in front.
The Forward Collision-Avoidance
Assist (FCA) is activated.
The engine speed is in dangerous
range.
When engine is stopped by Idle
Stop & Go (ISG). Each of these
actions will cancel the Smart
Cruise Control operation. The Set
Speed and Vehicle-to-Vehicle Dis-
system
5
5 77