Charging The Mobile Unit - ElmoTech MU-800-2 Operational Manual

3.8 Charging the Mobile Unit

In order to keep the Mobile Unit fully operational, you should connect the
unit to the supplied charging adapter whenever the unit is not in immediate
use.
To charge the Mobile Unit:
1. Connect the appropriate end of the supplied charging adapter into either,
the wall power socket, or the vehicle's cigarette lighter power outlet.
2. Connect the small end of the charging adapter into the charging socket
located on the Mobile Unit. The left LED indicator lights up indicating
the Mobile Unit is in charging mode.
Note that, if the Mobile Unit is connected for charging while the actual
unit is in Off mode, the unit automatically activates itself and charging
commences.
NOTICE
- In case of the following:
■ The LCD indicator blinks irregularly
■ The unit unpredictably turns off and resets itself
■ Any other irregular actions
Please disconnect and turn off, and return it to the monitoring agency /
supplier for replacement. Do not attempt to fix the unit by yourself.
For agencies / customers: Do not use faulty units at any time. If any of the
above malfunctions occur, return the unit to ElmoTech for repair.
Mobile Unit Operational Guide
Mobile Unit Activation and Operational Instructions
3-13