Table of Contents
Advertisement
RD6500.qxd
1/10/06
CONTACTS IN YOUR PHONE'S MEMORY
Through Contacts
1. From standby mode, press Right Soft Key
[Contacts] . Your Contacts display alphabetically.
2. Use
to highlight the Contact entry and press
, then press Left Soft Key
number.
3. Use
to highlight Add Number, then press
4. Enter the number, then press
5. Use
to highlight a Label, and press
save.
A confirmation message is displayed.
Default Numbers
The phone number saved when a Contact is created
is the Default Number. If more than one number is
saved in a Contact entry, another number can be
saved as the Default Number.
Note
The Default Number cannot be deleted by itself.
The entire Contact entry can be deleted or
another number can be set as the Default Number
allowing you to delete the original saved number
and keep the Contact entry.
32
3:05 PM
Page 32
[Edit] to edit the
.
to
Changing the Default Number
1. From standby mode, press Right Soft Key
[Contacts] . Your Contacts display alphabetically.
2. Use
to highlight the Contact entry and press
, then press Left Soft Key
default number.
.
3. Use
to highlight the phone number you want
to set as the Default Number and press Right Soft
Key
[Options] .
4. Press
[Set as Default#] .
A confirmation message is displayed.
Editing Stored Phone Numbers
1. From standby mode, press Right Soft Key
[Contacts] . Your Contacts display alphabetically.
2. Use
to highlight the Contact entry and press
, then press Left Soft Key
number.
3. Use
to highlight the phone number.
4. Edit the phone number as necessary and press
5. Use to confirm the Label for the edited phone
[Edit] to change the
[Edit] to edit the
.
Advertisement
Table of Contents
