Advertisement
USER MANUAL
Vinyl Encoder 10
SAFETY INSTRUCTIONS
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacture's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not try to bypass the safety purpose of the polarized plug. The wide blade is provided for your
safety. If the provided plug does not fit into your wall outlet, consult an electrician for replacement of
the obsolete outlet.
10. Prevent the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and point where from the power cord is connected to the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, exercise caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Serving is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled into
the apparatus or objects have fallen into it, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. The mains plug is used to unplug the device, so it must remain easily accessible.
WARNING
To reduce the risk of the fire or electric shock, do not expose this apparatus to rain or moisture.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION
DO NOT OPEN
RISK OF ELECTRIC SHOCK
CAUTION: To reduce the risk of electric shock, do not remove any cover. No user-serviceable parts
inside.
Refer servicing to qualified service personnel only.
The lightning flash with an symbol within the equilateral triangle is intended to alert the use to the
presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation mark within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
CAUTION
To prevent any risk of electric shock, ensure that the blades of the polarized plug can be fully inserted,
in order to prevent blade exposure.
GB-2
Advertisement
