Table of Contents
Advertisement
27
>> Messages
Text template
(Menu 1.8)
Use this menu to make and use
templates of frequently used
messages.
Creating a text template
1. Select an empty location.
2. Enter a message.
3. Press OK and select Done.
Using template options
From the template list, press OK to
access the following options:
• Send & Save: send a new
message using the template and
save the message in the Sent box.
• Send only: send a new message
using the template.
• Delete all: delete all templates.
Settings
(Menu 1.9)
Use this menu to set up various
options for using the messaging
service.
Text message
(Menu 1.9.1)
You can change the default SMS
settings.
• Send settings: set up the
following options for sending a
text message:
Reply path: allow the recipient to
reply to you through your message
server.
Delivery report: set the network
to inform you when your message
has been delivered.
Character support: select a
character encoding type. If you
select Automatic, the phone
switches the encoding type from
GSM-alphabet to Uni-code if you
enter a Unicode character. Use of
Unicode encoding will reduce the
maximum number of characters in
a message to about half.
If this menu is not shown, your
phone provides the automatic
character encoding by default.
Bearer selection: select either
GSM or GPRS preferred,
depending on your network.
• Profile settings: select a profile or
edit a profile. Press OK and select
Edit to access the following
properties in a profile:
Service centre: store or change
the number of your message
server.
Default destination: enter the
default destination. It will be
displayed in the first field on the
destination field.
Default type: set the default
message type. The network can
convert the messages into the
selected format.
Default validity: set the length of
time your messages are stored in
the SMS server.
Setting name: enter a name for
the profile.
Multimedia message
(Menu 1.9.2)
Advertisement
Table of Contents
