Hepa Filter - Electrolux Mighty Mite series Owner's Manual

How to Install Disposable Dust Bags
NOTE: Turn off vacuum and unplug the electrical cord before changing dust
bag or cleaning motor filter. Never operate the vacuum cleaner without
the dust bag or filter.
1. Turn off and unplug cleaner.
2. Open bag cover by pushing latch.
3. Clean motor filter by rinsing under warm
water and let air dry if heavily soiled.
Motor Filter
How to Install HEPA Filter
Check the HEPA filter with each disposable dust bag change. Replace twice a year or
after every six bag changes.
Upper Filter Tabs
Bottom Clips
How to Remove HEPA Filter
Grasp the bottom clips on the filter and
pull out and down to release the upper
filter tabs from the rear housing tabs on
the cleaner.
4. Open bag folds slightly.
5. Place bag in cleaner.
6. Tuck bag corners under collar.
7. Swing bag cover closed and push to
latch.
(on some models)
Insert upper filter corner tabs firmly under
rear housing tabs and pivot filter down until
bottom clips on filter click securely into
place on the cleaner.
Latch
Rear Housing Tabs
Bottom Clips
9