Hepa Filter - Electrolux Mighty Mite Z3690 Series Owner's Manual

How to Clean or Replace Motor Filter
1
Turn off and unplug cleaner.
2
Open lid by pushing
down hood latch and
lifting up on lid.
5
Clean motor filter by rinsing under warm water and let air dry if heavily soiled.
6
Reinstall completely dry motor filter before use.
How to Install HEPA Filter
Check the HEPA filter each time the dust cup is emptied. Replace twice a year or after
every six dust cup empties.
Upper Filter Tabs
Bottom Clips
How to Remove HEPA Filter
Grasp the bottom clips on the filter and
pull out and down to release the upper
filter tabs from the rear housing tabs on
the cleaner.
3
Lift dust cup out
of canister by
handle.
Handle
(on some models)
Insert upper filter corner tabs firmly under
rear housing tabs and pivot filter down until
bottom clips on filter click securely into
place on the cleaner.
4
Locate motor filter
in bottom of canister
body and lift out.
Rear Housing Tabs
Bottom Clips
9