Graco Symbio User Manual page 3

{GB Instructions}
Assembly
1 3
- Squeeze handle release and pull up to rotate it
until it locks into position as shown.
4
Attach front wheels until they click into place.
5
Attach rear wheels until they click into place.
6
Assembled frame.
Folding Your Pushchair
7
Squeeze handle release and rotate handle forward
and down as shown.
8
To fold, press button 1 down and pull up on lever 2
while pulling frame up.
9
Lay frame down with handle up.
10 11
- Place hand under storage latch and attach to
connector as shown.
Unfolding Your Pushchair
12 13
- Squeeze handle release and rotate handle to
position as shown.
14 15
- Swiftly pull up on handle to lock pushchair
frame into place.
Using Your Pushchair
16 17
- Swivel wheels- Pull up to lock, Press down to
unlock. When using the handle in reversed position you
should lock the swivel wheels for a better maneuverability.
18
To remove front wheels, press button as shown.
19
To remove rear wheels, press button as shown.
20
To lock brakes, pull handle up.
21
To release brakes, press button in and rotate handle
down.
Pram Position (SYMBIO GO Carrycot, Optional)
From birth up to 9 kgs (approx 10 months), in just one
click, you can easily switch Symbio into a pram, which is
the optimal position to best protect your baby while he is
asleep.
22
To attach carrycot to pushchair frame, place carrycot
on mounts as shown until they lock into place on both
sides of pushchair.
23
To remove, squeeze handle at back of carrycot and
pull off pushchair frame.
Pram Position (SYMBIO DRIVE Group 0, optional)
24
Attach carrycot to pushchair as shown. Make sure the
carrycot is securely attached on both sides.
25
To remove carrycot from the pushchair, slide the
button A on top of the handle. while pushing in button
B
on bottom of handle as shown.
Travel System Position
From birth up to 13 kgs (approx 12 months) you can turn
SYMBIO into a travel system in just one click. It is a very
convenient solution as it is very maneuverable and you can
take it in and out of the car without waking up your child.
26
There are two labels on the inside of the carseat
adapter identifying the correct direction in which to install
your carseat into the adapter. The carseat will only fit
securely into the adapter in one direction. Please refer to
the labels on the insides of the bracket so that you install
your carseat correctly.
27
To attach adapter, place adapter onto mounts as
shown until they lock into place on both sides of pushchair.
Adapter may be placed on pushchair in either direction.
28 29
- Attach carseat into bracket as shown. Your
carseat will only lock into the adapter one way. Please
double check that your carseat is securely locked into the
adapter by pulling up on the carseat.
30
To remove carseat from adapter, squeeze release handle
on rear of carseat and pull up on the carseat as shown.
31 32
- To remove adapter from pushchair, squeeze
release handles on sides of bracket and pull up on it.
Pushchair Position
The SYMBIO seat is suitable from 6 months up to 15 kgs
(approx 3 years).
33
To attach seat, place seat on mounts as shown until
they lock into place on both sides of pushchair. Seat may
be placed on pushchair in either direction, seat facing
towards front of pushchair or seat facing rear of
pushchair.
34
To attach arm bar, push into holes on both sides of
seat as shown.
35
To remove, press buttons and pull arm bar away from
pushchair.
7