Do you have a question about the A800 and is the answer not in the manual?
Questions and answers
Ruth Strauss
April 2, 2025
I put new batteries in the remote, now remote does not work and does not show time on the screen.
1 comments:
Mr. Anderson
April 2, 2025
The Amarey A800 remote may not be working or showing time after replacing the batteries because the batteries might not be installed correctly, the batteries could be low or dead, or the remote itself might be faulty. Ensure 2 AA batteries are inserted properly, with correct polarity, and are new.
This answer is automatically generated
tim
March 19, 2025
Amarey 800 stopped working after a year. Fully charged with blue light. It goes in a tight circle for 30 seconds then the light goes red and it beeps twice. I have replaced the battery in the vacuum and remote and cleaned and/or replace all brushs and check for stuck bumpers.
What is wrong?
Thank you
1 comments:
Mr. Anderson
March 19, 2025
The issue with the Amarey A800 vacuum that stops working after a year, shows a red light, and beeps twice after running in a tight circle could be due to a stuck side brush or wheel. According to the troubleshooting section, if the robot beeps twice, it may indicate that the side brush is blocked. Cleaning the side brush and checking for obstructions in the wheels may help resolve the problem.
This answer is automatically generated
Jo
August 6, 2025
Power button is stuck on red and resetting/unplugging won’t get it to start
Diana Jensen
June 27, 2025
I have my product book but I’m not finding a reason for my vacuum to beep 4 times while in the charger. I clean it regularly and I’m stumped! Help!!
Toni Dreher
May 1, 2025
Why does my vacume beep 5 times while on the charger?
Ruth Strauss
April 26, 2025
Bought a new remote how do I match it to my A800 Amarey robot vacuum
Page 2
Thank you for purchasing our amarey Robot Vacuum Cleaner. And welcome to amarey Robotic Family. If you have any problems, please don’t hesitate to contact our amarey Customer Service Center by email . You can also subscribe on website (https://www.iamarey.com) to get the latest information for new amarey Robot Vacuum Cleaner.
• Ensure that Robot cannot get caught on clothing, socks, pull cords for blinds or curtains, power cords, etc. • If the power cord is damaged, do not use any other power supply cord. For replacement cords, please contact amarey Customer Service Team.
About amarey A800 Robot 1.1 Robot Dock Button To send A800 Robot back to the Charging Dock, press on Robot or press on the Remote Control. LED Light Power On / Power Off / Cleaning Press and hold on to Power On or Power Off...
Page 6
Bin Release Button Anti-collision Sensors Anti-drop Sensors Charging Contact Points Swivel Wheel Side Brushes Battery Door Wheels Brush Guard Main Power Switch (On/Off) Dust Bin Rolling Brush...
Page 7
1.2 Accessories Cleaning Tool Charging Dock Adapter Remote Control Dust Bin Rolling Brush Sponge Filter and HEPA Filter 4 x Side Brushes 1.3 Charging Dock Signal Transmission Area Charging Indicator Charging Contact Points...
Page 8
Mode and Time Display Screen Auto Cleaning Return to Charging Dock Control Cleaning Direction Start / Stop and Adjust time Time Setup Schedule Setup Spot Cleaning Edge Cleaning Single Room Cleaning Max Suction in Single Room & Auto Cleaning Mode Notice: Install 2 AAA batteries before using the remote control for the first time.
Using amarey A800 Robot 2.1 Quick Start Plug in the Charging Dock, and take the rest wire into trunking at the bottom of Charging Dock. Notice: If you don't put the rest wire into the trunking, which may stuck Robot while charging or cleaning.
Page 10
Attach Side Brushes to the bottom of Robot by pressing a brush into each slot until you Turn on the Main Power Switch on the bottom of Robot. hear the voice "click”. Activate Robot Start Cleaning Cycle Place Robot onto the Charging Dock, ensure the metal Charging Contacts Points on •...
Page 11
Pause Power Off • To pause Robot during a cleaning cycle, press the button or press the button • Press and hold button until Robot indicators turn off. on the Remote Control. To resume the cleaning cycle, press button or press the button on the Remote •...
Page 12
Spot Cleaning Single Room Cleaning When you select Spot Cleaning, Robot intensely cleans a localized When one specific room needs to be cleaned, press the button area by spiraling outward about 3 feet (1 meter) in diameter and then on the Remote Control. spiraling inward to where it started.
Page 13
2.3 Cleaning Schedule Robot has Cleaning Schedule settings which allow you to customize when Robot cleans your home. These settings are available only through the Remote Control. Notice: Please ensure the Remote Control nearby Robot while setting the Clock or Schedule. Set the Remote Control's Clock Press button on the Remote Control,...
Page 14
Setting Cleaning Schedule Press button on Remote Control, and Press button to select the desired And then press the button. Robot then the hour section begins to flash in the figures. Press the button to select will "BEEP" when the Cleaning Schedule Cleaning Schedule display setting window.
Regular amarey A800 Robot Care To keep robot running at peak performance, perform the following care procedures. 3.1 Emptying Robot 's Dust Bin 3.2 Cleaning Robot 's Filter Press Bin Release Button to remove it. Remove filter by grasping the white tab.
Page 16
3.3 Cleaning Robot 's Rolling Brush, Swivel Wheel and Sensors. Take out the Rolling Brush, cut down the hair winded in the Rolling Brush with the provided Cleaning Tool’s knife, clean the vacuuming aisle by a cloth, . Tips: Clean Rolling Brush once every week and replace it usually every 6-12 months. Dust off the Anti-drop Sensors to maintain the best performance.
Robot may tell you something is wrong with tone distress sound. The indicator may also blink or lit red. Refer to the chart as below to resolve Robot’s problem. If the problem is not resolved, please contact our amarey Customer Service Center for more assistance.
Page 18
Notice: the lowest height is 2.7”. Robot gets stuck. • Robot is not suitable for use on long-pile carpet. Before using A800 near an area rug or on a prevent on a short-pile area rug with tasseled edges, please fold area rug’s edges under themselves to prevent A800 from tangling.
A800 Robot Model Input 19 V 0.6 A Battery 14.4 V Li-ion 2600 mAh Power Consumption 28 W Dust Bin Capacity 0.5L Max Cleaning Time 100 mins Charging Time 300 - 360 mins amarey Customer Care @amareyrobot support@iamarey.com @amarey.robot http://www.iamarey.com...
Need help?
Do you have a question about the A800 and is the answer not in the manual?
Questions and answers
I put new batteries in the remote, now remote does not work and does not show time on the screen.
The Amarey A800 remote may not be working or showing time after replacing the batteries because the batteries might not be installed correctly, the batteries could be low or dead, or the remote itself might be faulty. Ensure 2 AA batteries are inserted properly, with correct polarity, and are new.
This answer is automatically generated
Amarey 800 stopped working after a year. Fully charged with blue light. It goes in a tight circle for 30 seconds then the light goes red and it beeps twice. I have replaced the battery in the vacuum and remote and cleaned and/or replace all brushs and check for stuck bumpers. What is wrong? Thank you
The issue with the Amarey A800 vacuum that stops working after a year, shows a red light, and beeps twice after running in a tight circle could be due to a stuck side brush or wheel. According to the troubleshooting section, if the robot beeps twice, it may indicate that the side brush is blocked. Cleaning the side brush and checking for obstructions in the wheels may help resolve the problem.
This answer is automatically generated
Power button is stuck on red and resetting/unplugging won’t get it to start
I have my product book but I’m not finding a reason for my vacuum to beep 4 times while in the charger. I clean it regularly and I’m stumped! Help!!
Why does my vacume beep 5 times while on the charger?
Bought a new remote how do I match it to my A800 Amarey robot vacuum