Page 2
This product is warranted against failures due to defective parts or faulty workmanship for a period of three years after delivery to the original owner. During this period, FSR will make any necessary repairs may be reproduced, transcribed, or transmitted, in any form or by or replace the unit without charge for parts or labor.
Page 3
Shipping weight 1.2 lbs. UTP cable wiring EIA / TIA-568B ACCESSORIES standard Recommended Transmission range: • Under table tab mounting kit. FSR part number15982 (provided) 0-1000 ft. • Rack unit mounting kit to fi t a standard 19” rack. FSR part number 16214(optional)
Component or S-video 1/2". An undertable tab mounting kit is provided with the receiver unit. Maximum Resolution 1920 X 1080 (1080P) There is also a half rack kit available from FSR for mounting in a stan- Impedance 75 Ohms dard 19” rack mount. See “accessories” section for FSR part numbers and ordering information.
Page 5
TO AC POWER POWER POWER/ AUDIO AUDIO IN Connect the audio source to the T2-CATXW Transmitter via the 3.5mm SIGNAL 9VAC/0.2A 12VDC/0.1A 244 Bergen Blvd. West Paterson, NJ stereo audio jack on the face of the unit. Connect the T2-CARX Re-...
Page 6
Audio Power 9VAC/0.6A T2-CATXW Using the crosshatch test image, identify the left most color in each verti- 12VDC/0.3A cal line of the image. Select the “Next” push buttons on the Twister to “toggle” to this color.
Need help?
Do you have a question about the T2-CATXW and is the answer not in the manual?
Questions and answers