Huawei EchoLife HG8240 Quick Start Manual page 15

Description of LEDs
Read the following description of LEDs by referring to the preceding figures of LEDs.
Table 1 LED status indications 1
LED
CATV
WPS
WLAN
USB
-
TEL1 TEL2
-
LAN1 LAN4
LOS/PON
POWER
In the preceding table, if the LED status is marked "Blinking" but the frequency is not specified, it
indicates that the blinking frequency of the LED is determined by the data traffic transmitted.
Status
On
Off
On
Blinking
Off
On
Blinking
Off
On
Fast blinking
(Twice per second)
Off
On
Fast blinking
(Twice per second)
Slow blinking
(Once two seconds)
Off
On
Blinking
Off
See Table 2.
Green
Orange
Off
Description
The CATV function is enabled and CATV signals are
received.
The CATV function is disabled or CATV signals are
not received.
The WPS function is enabled.
At least one Wi-Fi terminal is accessing the system.
The WPS function is disabled.
The WLAN function is enabled.
Data is being transmitted.
The WLAN function is
The USB port is connected and is working in the
host mode, but no data is transmitted.
Data is being transmitted.
The system is not powered on or the USB port is not
connected.
The connection between the
server has been set
The voice service of the TEL port is established and is
in the off-hook or ringing state.
The voice service of the TEL port is registering.
The connection between the
server is not set up.
Ethernet connection is normal.
Data is being transmitted through the Ethernet port.
Ethernet connection is not set up.
The GPON Terminal is powered on.
The backup battery is supplying power.
The GPON Terminal is powered off.
12
disabled..
TEL port and the voice
up.
TEL port and the voice