Motorola E790 Instruction Manual page 37

option
Timer
Sensitivity
Note: Don't expect the club lights to work when your battery
is low or when you are on a phone call. The lights pause
when you receive a call or message or if you press a key.
If you want your phone keypad and display to flash for
incoming calls and messages, you need to set ring lights (see
the following section).
ring lights
Use ring lights to set up your phone to flash a light pattern
when receiving a call or message.
Find it: M > Settings > Ring Styles > Ring Lights >
Tip: The same light pattern displays for all calls. If you want
specific light patterns for calls from a specific phonebook
category, use the light ID feature (see page 62).
event lights
You can set up event lights for your phone to display a light
pattern when there are: incoming calls from phonebook
categories, incoming text and voicemail messages, alarms,
34 main attractions
Set how long the club lights stay active
(up to 10 minutes).
Set how loud the surrounding music or
sounds must be for the club lights to
respond. Values range from 1 (least
sensitive) to 7 (most sensitive).
light pattern