Kärcher BDS 43/150 C Quick Start
Hide thumbs Also See for BDS 43/150 C:

Advertisement

QUICKSTART
BDS 43/150 C

Start up

1
2
A
3
A

Operation

1
A
2
A
Warning
These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.
The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.
A
B
B
B
C
Danger
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appliance.
A Pull the lever for level adjustment and
bring the handle toward the front into a
vertical position.
Tilt the appliance rearward.
B Place the disc brush/driver plate onto the
actuator and turn in anti-clockwise direction.
Set up the appliance.
Detergent tank (option)
A Remove the lid.
Insert the filling hose into the fill opening
and guide the other end to a water faucet.
Fill in fresh water (maximum 50 °C).
B Fill detergent solution into the detergent
tank. Replace the lid.
A Insert the mains plug into a socket.
B Pull the lever for level adjustment.
C Tilt the handle into a comfortable position
(arms outstretched).
Hold the handle with both hands.
Release the lever for level adjustment.
Starting the machine
A Press and hold the unlocking button.
Use the ON/OFF switch.
Release the unlocking button.
Caution
Risk of damage to the floor covering.
Do not operate the appliance on the spot.
Control the direction
A Left: Press the handle downward.
Right: Raise the handle.
5.964-047.0 06/12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BDS 43/150 C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kärcher BDS 43/150 C

  • Page 1 QUICKSTART BDS 43/150 C Warning These are only brief instructions! Please read and comply with these instructions prior to using or servicing your appliance. The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers for the operator and other persons.
  • Page 2 QUICKSTART Operation Cleaning A Apply the detergent solution to the floor or use the dosing lever of the detergent tank (option). Move the appliance over the surface to be cleaned. Repeat process for severe contamination. Afterwards, pick up the wastewater with a wet vacuum or a cloth.
  • Page 3 QUICKSTART Maintenance and care A Check brush for wear and tear and clean it. Check the brushes for wear (bristle length at least 10 mm), replace if required. Rinse contaminated disc brushes with water. Wash contaminated pads at a max. temperature of 60 °C.

Table of Contents