Planning Your Fence Layout; Around Obstacles; Back Yard Only; Separate Front & Back - Pet Stop Comfort Contact PCC-200 Owner's Manual

Owner's Guide
STEP 1

Planning your fence layout

• When designing your fence layout, it is
important to remember that your fence
boundary is one continuous loop of
wire, starting at your wall-mount trans-
mitter, forming a boundary loop around
your selected area and returning back
to the transmitter.
• You will need to allow room in your
plan for 8' – 10' of signal area from the
boundary wire.
• Do not run the boundary wire within 10'
parallel of utility lines. Utility lines can
create interference. Have utility lines
marked prior to fence wire installation.
• To maintain a consistent signal fi eld,
use a gradual radius when running the
wire around corners, as illustrated.
Avoid hard 90 degree angles.
√
×
4
MKTG0715_063_E_Comfort Contact Owners Guid-PS.indd 4
PCC-200
Entire Yard

Around Obstacles

back Yard Only

Separate Front & back
7/21/15 12:26 PM