Table of Contents
Advertisement
work only if it has a valid roaming agreement with
your home network.
Network selection
]Automatic: Use this to set the phone to automatically
search for and select one of the cellular networks
available in your area. The phone will default back to
Automatic if it is switched off.
]Manual: If you want to select the desired network
manually from a list of network, you can activate this
function. If the connection to the manually selected
network is lost, the phone will sound an error tone
and ask you to select a network again. The selected
network must have a roaming
agreement with your home network, that is, the
operator whose SIM card is in your phone. The
phone will let you select another network if the
phone fails to access the selected network. If you
switch off the phone, the phone will be reset to
Automatic.
]Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset's predefined list
of known networks.
Menu 9-5-1
GPRS setting
GPRS(General Packet Radio Service) is a technology
that allows mobile phones to be used for sending and
receiving data over the mobile network. GPRS is a
data bearer that enables wireless access to data
network such as the Internet.
Before you can use GPRS technology.
]You need to subscribe to the GPRS service.
For availability and subscription to GPRS service,
contact your network operator or service provider.
]You need to save the GPRS settings for the
applications used over GPRS.
If you select Switch On and you are in a network that
supports GPRS, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive a picture message, is
quicker. If you select When needed, the phone will use
settings
Menu 9-6
59
Advertisement
Table of Contents
