Table of Contents
Advertisement
PIN cannot use your phone without your approval.
Note Before disabling the PIN code request feature, you
n
must enter your PIN.
The following options are available:
• Enable: You must enter the PIN each time the phone
is switched on.
• Disable The phone connects directly to the network
when you switch it on.
Handset lock
When the Handset lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on. The password is
factory set to 0000. To change the phone password,
refer to the Change codes – Security code menu
option [Menu 3-4-5]. Once the correct password has
been entered, you can use the phone until you switch
it off.
The following options are available by pressing the left
soft key.
• On: Enables the handset lock
.• Off: Disable the handset lock.
• Automaatic: If this option is selected, each time to
change SIM card, the handset function will be
enabled automatically, and you will be request to
input the correct security code before using the new
card.
Call barring
Call barring lets you restrict the making and receiving
of calls with your phone. For this function, you need
Menu 9-4-2
the barring password, which you can obtain from your
service provider.
The following options are available:
]All outgoing: No call can be made.
]Outgoing international: International calls cannot be
made.
]Outgoing international when roaming: When
abroad, calls can be made only to numbers within the
current country and to your home country, the country
where your home network provider is located.
]All incoming: No call can be received.
settings
Menu 9-4-3
57
Advertisement
Table of Contents
