Dryer Operation - XPower B-2 Owner's Manual

1. Place the dryer on a flat surface. Plug the
electrical cord into an outlet.
2. Screw the hose on clockwise to connect to
the front hose connector (Fig. A). Attach
the desired nozzle. Keep the inlet filter and
crossed cover in place on the rear cover.
Turn on switch to desired speed.
3. All units in use must be monitored at all times.
• Before washing, use pet dryer with the cone nozzle to blow out dirt and loose fur from the
top coat and undercoat. Brush pet thoroughly and separate matted fur.
• After washing, thoroughly towel dry pet to remove excess water. Use the dryer with desired
nozzle to blow off excess water from the large areas of the body (torso, back, hind area).
• Use detail nozzles for smaller areas (underarms, feet, neck area). Be extremely careful not to
direct airflow to the pet's eyes, ears or nose.

DRYER OPERATION

DRYING TIPS
- 5 -
Fig. A
Hose Connected to Front