Table of Contents
Advertisement
Settings
242
If there are access points defined, to create a new
access point, select
select:
•
Use default settings
the needed changes and press the
save the settings.
•
Use existing settings
information as the basis for the new access point
settings. A list of existing access points is opened.
Select one. Access point settings are opened with
some fields already filled.
Fill in the following fields:
:
Notes
• Begin filling in the settings from the top because depending
on what data connection you select (
certain setting fields are available.
• Follow the instructions given to you by your service provider
very carefully.
•
Connection name
connection.
•
: The options are
Data bearer
Depending on what data connection you select, only
certain setting fields are available. Fill in all fields
marked with
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
: To be able to use a data connection, the network
Note
service provider must support this feature, and if
necessary, activate it for your SIM card.
Options
to use the default settings. Make
to use existing setting
: Enter a descriptive name for the
Must be defined
New access point
soft key to
Back
Bearer type
and
GPRS
Data call
or with a red asterisk.
and
), only
.
Advertisement
Table of Contents
