Cassette Left Edge Margin Adjustment (2Nd Side; Software Adjsutment); Lead-Edge Margin Adjustment (1St Side/Normal Paper) - Canon AG1 Service Manual

5
Adjustment > Pickup Feed System > Lead-edge Margin Adjustment (1st side/normal paper)
Cassette Left Edge Margin Adjustment (2nd side;
Software Adjsutment)
Adjustment 1) Make 2-sided copy from cassette, and check that the left margin on the 2nd side
procedure is 2.5 ± 2.0 mm (for LTR/LGL: 4.2 ± 2.0 mm).
Feeding direction
of paper
2) If the left margin is out of the specification, change the adjustment value for the left
margin on the 2nd side in cassettte.
Service Mode > COPIER > ADJUST > FEED-ADJ > ADJ-C1RE; 1 increment of
the value spreads out the left margin by 0.1 mm. (Image move to the right)
3) Make 2-sided copy using the Cassette, and check that the left edge margin is 2.5
± 2.0 mm.
4) Write down the new adjustment value on the service label.
• ADJ-C1RE
5) Exit from Service Mode.
5 Adjustment > Pickup Feed System > Lead-edge Margin Adjustment (1st side/normal paper)
image
T-5-7

Lead-edge Margin Adjustment (1st side/normal paper)

Adjustment 1) Make copies from cassettte, and check that the lead-edge margin is L1 = 4.0
procedure +1.5/-1.0 mm. If the lead-edge margin is out of the specification, go through the
following steps to make adjustment.
Feeding direction
of paper
In Case of Nonstandard
2) Select the following in Service Mode: COPIER > ADJUST > FEED-ADJ > REGIST.
3) Change the setting value to make adjustment. (When the setting value is
increased by "1", the leading edge margin is increased by 0.1 mm: Image move to
the trailing edge)
4) Write down the new adjustment value on the service label.
• REGIST
5-6
image
L1
5-6
T-5-8