SMART Fortwo 451 Series Introduction Into Service Manual page 42

When the charging connector is connected to the
power outlet, this is shown on the multifunction
display with a connector symbol.
In addition, the charging progress (bar indicator)
and the expected charging duration are displayed
in the ignition key position "Circuit 15 On".
i Note
The vehicle cannot be started during the
charging process.
Charging cable for charging at public
charging stations
A 7-pin charge coupling as per IEC62196-2 is
installed at the vehicle end and a 7-pin charge
connector as per IEC62196-2 is installed at the
power outlet end. The operating parameters are
exchanged between the on-board charger and the
charging station via a data line in the charging
cable (Control Pilot, CP). The charge connectors
are locked at the vehicle end and the charging
station end during the charging process.
Introduction of smart fortwo electric drive (3rd Generation) • Model Series 451
A1p13 Multifunction display
1 Connector symbol
2 Charging progress
3 Charging duration
Charging cable
P54.33-2145-00
41