Child Seat Functions; Adjusting The Harness; Adjusting The Buckle - Britax B-SAFE 35 User Manual

BRITAX Child Safety, Ltd.

Child Seat Functions

Adjusting the Harness

The infant car seat is assembled with the harness in the
inner loop.
• Inner Loop: For infants
weighing less than 5 kg (11 lbs).
• Outer Loop: For infants
weighing over 5 kg (11 lbs).
IMPORTANT: The harness straps
should be located in the closest
harness height position at or
below the child's shoulders.
IMPORTANT: Ensure the harness straps are fully secured
on the harness yoke�
1. Loosen the infant car seat
harness by pressing the
harness adjuster release
button and pulling both
harness straps forward.
2. Locate the harness yoke
on the back of the infant
car seat and slide one
harness strap off of the
yoke.
30
Inner Loop
Outer Loop
3. From the front of the seat,
pull the harness strap
through the cover and
head pad.
NOTE: Do not remove the
comfort pad or chest clip
4. Ensure that the harness
strap is not twisted and
rethread the harness
strap through the head
pad and then through the
appropriate harness height
slot in the cover and shell.
5. From the back of the seat,
reattach the harness straps
to the harness yoke.
6. Repeat these steps with
the second harness strap
and ensure they are at the
same slot height.

Adjusting the Buckle

• Inner Slot: For infants
weighing less than 5 kg
(11 lbs).
• Outer Slot: For infants
weighing over 5 kg (11 lbs).
B-SAFE 35 User Guide
.
Inner Slot
Outer Slot
31