Using Wireless Bluetooth ® Connection; Bluetooth; Pairing From Mm Software - HomeAgain UNIVERSAL WORLDSCAN READER PLUS User Manual

5.2 Using wireless Bluetooth

5.2.1 BLUETOOTH

®
The UWSR+ is equipped with a Class 2
Bluetooth Serial Port Profile (SPP).
®
Enable the Bluetooth
Bluetooth works on a premise that one end of the communication will be paired to the other one. A host ini-
®
tiates communications and looks for other devices to connect. Smart phones and computers usually establish
the connection with readers which are connectable and discoverable.
Note 4: Understanding the Bluetooth
Disabled
No icon
Note 5: A single beep is emitted with a visual message when the Bluetooth
beeps are emitted with a visual message when the disconnection occurs.
Note 6: If you are using a Smartphone or a PDA, an application is required (not supplied).

5.2.2 Pairing from MM Software

MM Software is able to search for Bluetooth devices in the vicinity and pair to one of them. The target here is to
find your reader and to connect it to your computer by Bluetooth.
NOTE: Before continuing, make sure the Bluetooth is enabled on your reader.
1. Click on "Connect" menu and select "Connect Bluetooth Reader..."
2. Power-on your reader and click on "Search for devices":
2 Operating distance of communication is around 15 m (49 ft).
connection
®
management
2 Bluetooth
feature by using the "Microchip Management Software"
®
icon:
®
Connectable mode
Blinking
Not connected
module to communicate. This device is compliant with the
®
Host mode
Blinking
Fixed
Connected Not connected
Fixed
Connected
connection is established. Three
®
10