Table of Contents
Advertisement
Buzzer sound setup
(1)
Setting up the buzzer.
Press the "Power On/Off" touch button (1) (if it is in OFF position).
Press and hold "Tablet" (5) and "Half Load" (6) touch buttons for 3 seconds at the
same time to set the volume level.
While pressing "Tablet" (5) and "Half Load" (6) touch buttons (during 3 seconds.),
the display shows character of counting down from 3 seconds to 1 second.
• The first time the volume is adjusted, at the end of 3 seconds, "S03" is shown in
the display.
• If the volume has been adjusted before, at the end of 5 seconds, the previously
selected level is shown on the display (from ''S00'' to ''S03'').
The user can increase or decrease the volume level with repeated presses of either
the "Tablet" (5) or "Half Load" (6) touch buttons, as follows;
- To increase the buzzer volume
1) Press the ''Half Load''(6) touch button;
2) Display screen changes from ''S00'' to ''S03''.
- To decrease the buzzer volume
1) Press the ''Tablet'' (5) touch button;
2) Display screen changes from ''S03'' to ''S00''.
''S00'' level means that all buzzer sounds are off.
To exit volume adjustment mode, switch off the machine.
The last volume level selected will be stored in memory.
Note: From level sound ''3'' to ''1'', loudness level is reduced in stages.
(7)
(2)
(3)
Operating your machine
(4)
(5)
(6)
33
Hide quick links:
Advertisement
Table of Contents
