Advertisement
REAL TIME CLOCK
Real time clock symbol is selected by pushing to "function" button for 3 times.
•
When the real time is seen on display, you can push to "ok" button, then you can adjust the clock
•
by pushing "+" and "-" buttons. If you want to set the values, you will push to "ok" button.
•
After pushing "ok" button to set, minute number segment will blink. Also you can adjust the
value by using (+) or (-) buttons. Then you should push "ok" button to set. Or after adjusting, you
will not push any buttons for 3 sec after it sounds as "beep-beep". It shows that setting opera-
tion is ok.
Showing real time clock on the screen can be cancelled by pushing the "function" button.
•
•
This function is selectable for user. When it is chosen the clock will be seen on the screen. When
you push the "function" button; this function will be cancelled.
14
Advertisement
