Brushroll; Brush Roll Belt - Electrolux Z410 Series Owner's Manual

HOW TO MAINTAIN
CAUTION: Turn off the switch and unplug the electrical cord before servicing
the cleaner.
Replace Brush Roll Belt
We recommend that the Brush Roll Belt replacement be carried out by an Electrolux
Service Agent.
Replace Brush Roll
As the brush roll rotates, it sweeps and combs the carpet nap. Remove hair and threads
from the brush roll so it continues brushing the carpet nap. Check brush roll occasionally
for hair or string that may have wrapped around dowel.
When bristles have worn to about 1/4" in length, carpet cleaning effectiveness will be
reduced. It is time to replace the brush roll. We recommend that the Brush Roll
replacement be carried out by an Electrolux Service Agent.
HOW TO REMOVE BLOCKAGES
CAUTION: Turn off the switch and unplug the electrical cord before servicing
the cleaner. Pulleys can be hot from normal use, to avoid burns do
not touch pulleys.
Turn the unit over on its top, brushroll facing up. Remove the two screws holding the
access door to the clean out port. Remove any blockages from the clean out port and
brushroll areas, then replace the access door and two screws.

Brushroll

10
(continued)
Access Door
Screw
Screw
Clean Out Port