Trouble Shooting Guide
Windlass does not operate when activated
•
Check that the breaker/isolator panel is "On."
Check the connections to the following:
•
•
•
•
•
•
Check the battery condition by operating other electrical equipment.
•
Check that the solenoid is working. You should hear the solenoid click when activated.
Motor is working but the chainwheel does not rotate
•
Check that the clutch nut is not too loose, causing slippage.
•
Check that the chainwheel is not jammed with the chain. If necessary, reverse the windlass to free
the jam.
•
Check that the key between the shaft and the gearbox is installed.
•
If the windlass does not rotate smoothly or there is excessive noise, the gearbox may be
damaged.
•
Check the motor drive pin by unbolting the motor from the gearbox.
Vetus-Maxwell APAC Ltd
Remote up/down control panel and footswitches (if fitted)
Circuit breaker/isolator panel
Reversing solenoid
Windlass motor
1000 1500 Windlass
25