Advertisement
When unpacking, check to make sure that all parts are included. If any parts are missing or
broken, please call Harbor Freight Tools at the number on the cover of this manual as soon
as possible.
1.
Read all instructions and warnings on the battery before charging the battery.
2.
To avoid accidents, charge the supplied battery only. Do not use a different charger
with this battery.
3.
Do not expose the battery to rain or wet conditions.
4.
To avoid damage of cable and plug, never pull the cable to disconnect the charger.
5.
Do not use the charger if the cable or plug are damaged.
6.
Repairs should be carried out by a qualified technician only.
7.
Do not touch the battery poles with any conductive source.
8.
Do not store the battery in a box with other metal objects.
9.
Do not throw the battery in a fire.
The Battery does not come charged from the factory. Charge before using. Refer to top
photos on next page.
1.
Push the two side buttons in on the Battery, then slide the Battery off the Drill handle.
2.
Slide the Battery into the Charger Base. The battery can only insert one way using the
guide tabs.
3.
Plug the Charger Adapter output cord into the Battery Charger connector.
4.
Plug the Charger Adapter line cord into an electrical outlet.
SKU 45935 / 45936
45935-45936a.p65
4
Unpacking
Battery
Battery Precautions
Charging Battery
Page 4
Cordless Drill with keyless chuck shown
Model 45936 with Keyed chuck (not shown) will
also come with chuck key
Battery Charger
10/15/03, 2:51 PM
Advertisement
