1. Manuals
  2. Brands
  3. Trapeze Manuals
  4. Wireless Access Point
  5. Mobility Point MP-620
  6. Installation instructions manual

Trapeze Mobility Point MP-620 Installation Instructions Manual

Hide thumbs Also See for Mobility Point MP-620:

Advertisement

Table of Contents

See also: Installation Manual
Installing a Trapeze Networks™ Model
MP-620 Mobility Point™ Access Point
Mount the MP-620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connect External Antenna(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connect Cables to the MP-620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connect the Power Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Configure the MP-620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
This document provides basic indoor hardware installation instructions for MP access point model
MP-620. The MP-620 is suitable for installation outdoors.
Trapeze Networks, Inc.
5753 W. Las Positas Blvd.
Pleasanton, CA 94588
Tel: +1 925-474-2200
Fax: +1 925-251-0642
Toll-Free: 877-FLY-TRPZ (877-359-8779)
Part Number: 730-9502-0066

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mobility Point MP-620 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Trapeze Mobility Point MP-620

Summary of Contents for Trapeze Mobility Point MP-620

  • Page 1: Table Of Contents

    Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point Mount the MP-620 ..............5 Connect External Antenna(s) .
  • Page 2 Installasjon skal kun utføres av kvalifisert service personell. Les og følg alle varsels meldinger og instrukssjons merkinger på produktet og i veiledningen. Les resten av denne veiledningen før produktet installeres. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...
  • Page 3 Монтаж должен производить только квалифицированный обслуживающий персонал. Прочтите и выполняйте все предупредительные примечания и инструкции, нанесенные на изделие или включенные в документацию. Перед монтажом изделия прочтите данный документ до конца. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...
  • Page 4 .‫רצומה תנקתה ינפל ,ואולמב הז ךמסמ ארק. דועיתב תועיפומ וא רצומה לע‬ For more information about MP installation as well as safety and installation requirements, see the following: Trapeze MP-620 Installation Guide Trapeze Regulatory Information Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

  • Page 5: Mount The Mp-620

    (1.27 cm) wide can be threaded through the main part of the bracket to secure it to a larger diameter pole without using the U-shaped part of the bracket. This method is illustrated in the following figure. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

  • Page 6: Connect External Antenna(S)

    Mount the external antenna to the same supporting structure as the MP-620, within 3 m (10 ft) distance, using the bracket supplied in the antenna package. Connect the antenna to the MP-620’s N-type connector using the RF coaxial cable provided in the antenna package. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

  • Page 7: Connect Cables To The Mp-620

    Caution! Be sure that grounding is available and that it meets local and national electrical codes. For additional lightning protection, use lightning rods, lightning arrestors, or surge suppressors. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

  • Page 8: Connect The Power Injector

    “Input” on the power injector. Use Category 5 or better UTP cable for 10/100BASE-TX connections. Note. The RJ-45 port on the power injector is an MDI port. If connecting directly to a computer for testing the link, use a crossover cable. Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

  • Page 9: Configure The Mp-620

    To configure the channels, power settings, and other MP parameters, see the following: Trapeze Mobility System Software Quick Start Guide “Configuring MP Access Points” chapter in the Trapeze Mobility System Software Configuration Guide Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...
  • Page 10 Configure the MP-620 Installing a Trapeze Networks™ Model MP-620 Mobility Point™ Access Point...

Table of Contents