AEG SANTO SK 48800-7I Operating Instructions Manual page 38

4. From the plastic cover (E), which is used
to cover the hinge with the pivot pin, you
must take away the part as indicated in
the drawing.
This operation is made easer since there
is, in the internal part of the cover hinge
lid a groove that facilates the removal of
this coomponent.
"Remove the part marked with DX, if the
pivot pin is inserted in the right hinge, SX
in opposite case."
Apply covers (C-D) on joint cover lugs and
into hinge holes.Snap hinge covers (E)
into position.
5. Separate parts Ha, Hb, Hc, Hd as shown in
the figure.
38