Overview Of The Components; Instruction Manual - AEG SRC 4315 CD Instruction Manual

General Safety Instructions
Read the operating instructions carefully before putting the
appliance into operation and keep the instructions including the
warranty, the receipt and, if possible, the box with the internal
packing. If you give this device to other people, please also pass
on the operating instructions.
• To avoid the risk of fi re or an electric shock, you should not
expose the device to rain or moisture. Consequently, do not
use the device in the immediate vicinity of water - for examp-
le near a bath tub, a swimming pool or in a damp cellar.
• Use the device only for the intended purpose.
• Only connect the device at a properly installed plug socket.
Pay attention that the specifi ed voltage corresponds to the
voltage of the plug socket.
• When using external mains supply, pay attention to the
correct polarity and voltage. Always place the batteries in
the correct direction.
• Assemble the device in such a way that the available
ventilation openings are not covered.
• Never open the housing of the device. Incorrect repairs can
constitute a considerable risk for the user. Should the device
become damaged, in particular the mains supply cable, do not
operate the device any longer, but rather have it repaired by an
expert. Check the mains supply cable regularly for damage.
• For safety reasons a broken or damaged mains lead may
only be replaced by an equivalent lead from the manufactu-
rer, our customer service department or a similary qualifi ed
person.
• If the device is not used for a longer period, remove the plug
connector from the plug socket or take out the batteries.
These symbols may be found on the machine and are intended
to indicate the following:
The lightning symbol should advise the user of parts
in the inside of the device which carry dangerously
high voltage levels.
The symbol with an exclamation mark should advise
the user of important operation or maintenance
instructions in the accompanying documentation.
Devices bearing this symbol work with a „class 1
laser" for tracing the CD. The built-in safety switches
should prevent the user being exposed to dange-
rous laser light, which is invisible to the human eye,
when the CD compartment is opened.
Under no circumstances should these safety switches be
bypassed or manipulated, as this could result in a danger of
exposure to the laser light.
Children and Frail Individuals
• In order to ensure your children's safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach.
Caution! Do not allow small children to play with the foil as
there is a danger of suffocation!
• In order to protect children or frail individuals from the ha-
zards of electrical equipment, please ensure that this device
05-SRC 4315 CD AEG 39
is only used under supervision. This device is not a toy. Do
not allow small children to play with it.
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is
essential to comply with these instructions in order to avoid
accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE: This highlights tips and information.
Special safety information
This device works with
a class 1 laser.

Overview of the Components

1 ON/STANDBY button
2 DC 6V connexion
3 Time/alarm time adjustment function button
(SET/DISP)
4 AUX IN Socket
5 Wake-up interval (SNOOZE)
6 Function key for delayed switch-off (SLEEP)
7 RADIO/CD/AUX Function selection button
8 AL1 (alarm time 1) button
9 AL2 (alarm time 2) button
10 TUNING control
11 MODE Band selection button
12 VOLUME
13 Loudspeakers
14 LCD display
15 CD compartment
16 OPEN/CLOSE (open) CD compartment
17 FR/HOUR UP / FF/MIN. UP buttons
(reverse/forward search / Hours/Minutes)
18 STOP/MO/ST button
19 PLAY button
20 RANDOM button
21 REPEAT button
22 BACKLIGHT LIGHT/DIM switch
23 Battery compartment
Initial Use of the Device/Introduction
• Please read the operating instructions carefully before using
the device for the fi rst time!
• Select a suitable location for the device, such as a dry, fl at,
non-slip surface on which it is easy to operate the machine.
• Ensure that the device is suffi ciently ventilated!
39
16.03.2007, 12:29:40 Uhr