Commissioning Sitrans Tr420 (Hart) - Siemens SITRANS TH320 Operating Instructions Manual

Temperature transmitter

Hide thumbs Also See for SITRANS TH320:

Operating instructions manual (236 pages)

Compact operating instructions (98 pages)

Compact operating instructions (94 pages)

Table Of Contents

100

101

102

103

104

Table of Contents

Before you start, please read the following safety notes:

● General safety notes (Page 17)

● Basic safety notes: Installing/mounting (Page 41)

● Basic safety notes: Connecting (Page 49)

● Basic safety notes: Commissioning (Page 57)

Read the entire device manual in order to achieve the optimum performance of the device.

Procedure

1. Mount the device.

Installing SITRANS TR on DIN rail (Page 46)

2. Connect the device.

Connecting TR320 (Page 53)

3. Switch on the power supply.

Switching on the supply voltage (Page 62)

4. Wait for 2 seconds.

After this startup time, the device is operational.

5. Wait 5 minutes to get exact measured values.

6. If you want to change the factory settings, configure the device using remote operation.

Parameter assignment over remote operation (Page 68)

Result

The LED is lit green.

Structure (Page 31)

7.7