To Verify If The Installation Of The Driver Was Completed Successfully; Wl6207 Configuration Utility - Socket WL6207 User Manual

To verify if the installation of the driver was completed
successfully:
1. Soft reset the PDA (push Soft-reset Button of PDA)
* Some PDA may not require resetting but it should be safer to reset.
2. Insert the WL6207 into the PDA
3. Check the LED on the WL6207. If steady
4. (Optional) To check the quality of the network connection, you should use the WL6207 configuration
utility program as described in the next section

WL6207 CONFIGURATION UTILITY

1. Click Install Utility to perform utility installation.
2. Click "YES" to proceed the installation.
Blue light is seen, the WL6207 is active.
7
Step 2