Setting The Warning Volume Of The Blind-Spot Collision Warning; Operating Conditions - Kia 2019 niro Owner's Manual

Driving your vehicle
onds on the outer side view
mirror.
If the vehicle is turned off then on
again, the system maintains the
last setting.
Setting the warning volume of the
Blind-Spot Collision Warning
The driver can select the warning
volume of Blind-Spot Collision
Warning in the User Settings in the
LCD display by selecting
Go to the 'User Settings → Driver
Assistance → Warning Volume →
High/Medium/Low'.
For more details, refer to "LCD dis -
play" on page 5-53.
NOTICE
If you change the warning volume,
the warning volume of other sys -
tems may change. Always be aware
before changing the warning vol -
ume.

Operating Conditions

The system enters the ready sta -
tus, when 'Active Assist' or 'Warning
Only' is selected and the following
conditions are satisfied:
Active Assist
The Blind-Spot Collision-Avoidance
Assist system will activate when:
6 80
Blind-Spot Collision Warning
Vehicle speed is between 40 mph
and 110 mph (60 km/h and 180
km/h).
The system detects both of the
lane lines.
An approaching vehicle is
detected next to or behind your
vehicle.
The Blind-Spot Collision Warning
system will activate when:
The vehicle speed is above
approximately 20 mph (30 km/h).
Warning Only
The Blind-Spot Collision Warning
system will activate when:
The vehicle speed is approxi -
mately 20 mph (30 km/h).
* The Blind-Spot Collision-Avoid -
ance Assist system is not acti -
vated when "Warning Only" is
selected.