User Manual B-Net 93 60
6.2.5
Subterminal
01/2006
Hardware requirements:
•
The terminal must be equipped with option BEX302 (interface RS485).
•
The subterminals must be connected at the BEX101 mother board, please
refer to chapter 5.6.6
Other requirement:
•
To support subterminals a corresponding license key is required; refer to
chapter 7.3.6.8.
Settings in the service module:
•
Hardware Settings/SubLine, refer to chapter 7.3.7.5.
•
Sub line 1:
•
Interface:
•
Hardware settings/serial line communication parameter,
please refer to chapter 7.3.7.2.
•
COM 1:
•
Bits per second:
•
Data bits:
•
Parity
•
Stop bits:
© Kaba Benzing GmbH
Enabled
COM1
Enabled
19200
7
EVEN
1
Set-up
45