Table of Contents
Advertisement
Set-up
6.2.3
Host connection via partyline
6.2.4
Host connection via modem
44
Hardware requirements:
•
The terminal must be equipped with option BEX302 (interface RS485).
•
The host partyline must be connected at the BEX101, please refer to chapter
5.6.6
Settings in the service module:
•
Hardware Settings/Host Line, refer to chapter 7.3.7.4.
•
Host Line:
•
Interface:
•
Group ID:
•
Device ID:
•
Hardware settings/serial line communication parameter,
please refer to chapter 7.3.7.2.
•
COM 1:
•
Bits per second:
•
Data bits:
•
Parity
•
Stop bits:
Hardware requirements:
•
The terminal must be equipped with an optional internal analog modem or
ISDN modem.
Settings in the service module:
•
Hardware Settings/Host Line, refer to chapter 7.3.7.4.
•
Host Line:
•
Interface:
•
Group ID:
•
Device ID:
•
Hardware settings/serial line communication parameter,
please refer to chapter 7.3.7.2.
•
COM 1:
•
Bits per second:
•
Data bits:
•
Parity
•
Stop bits:
•
Initialize modem; refer to chapter 7.3.7.8
© Kaba Benzing GmbH
Enabled
COM1
(GID)
(DID)
Enabled
9600
7
EVEN
1
Enabled
COM1
(GID)
(DID)
Enabled
9600
7
EVEN
1
User Manual B-Net 93 60
01/2006
Hide quick links:
Advertisement
Table of Contents
