Operation; Control Panel; Before Cooking; Auto Cooking/ Time.weight Knob - Beko MOC20200R User Manual

4

Operation

4.1 Control panel

14 / EN

4.2 Before cooking

The LED flashes 3 times when plugged in power
supply. Then it flashes ":", prompting you to input
the cooking menu and time.
4.3 Auto cooking/ time.
Weight knob
You can increase or decrease cooking time, weight
or choose the auto cooking menu during opera-
tion by turning Auto cooking /Time.Weight knob.

4.4 Pause/cancel

At the initial or input stage: press once to cancel
input programs and resume initial stage.
During cooking: press once to stop oven op-
eration, press twice to cancel cooking programs.

4.5 Auto reminder

When your preset cooking procedure have fin-
ished, the LED display will show End and three
beeps sound will be heard to prompt you to take
out food. If you do not press Pause/Cancel button
once or open the door, the beep will be sounded at
an interval of 3 minutes.

4.6 Clock setting

Clock button make it available for you to input
current or preset time when ":" flashes onto LED
display after plugged in, or try to skip it over to
continue if unnecessary.
On standby state, press and hold
Preset/Defrost/Clock button about
A
3 seconds, the oven will enter clock
state; if press Preset/Defrost/Clock
button once, the oven will enter set-
ting defrost menu automatically.
Microwave Oven / User Manual