Download Print this page

Adjustment - Kenwood TK-7185 Service Manual Addendum

Vhf fm transceiver 5 tone version
Hide thumbs Also See for TK-7185:

Advertisement

Controls
Power
Volume
switch
Up/Down key
Modular
Programmable
MIC jack
function keys
Panel Test Mode
■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [A] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■ Key operation
"FNC" not appears
Key
Function
[S]
Shifts to Panel tuning mode
[A]
Function on
[B]
MSK 1200bps and 2400bps
[C]
Test signaling CH up
[ ]/[ ]
Test frequency CH up/down
[ ]/[ ]
Volume up/down
[
]
Squelch on/off
[■]
Narrow/Wide
Microphone key
[PTT]
Transmit
[0] to [9]
Use as the DTMF keypad.
and [A],
If a key is pressed during
[B], [C],
transmission, the DTMF
[D], [#],
corresponding to the key
[ * ]
that was presses is sent.

ADJUSTMENT

Channel
LCD
Up/Down key
Display
-
"FNC" appears
2400bps:
icon appears
Signaling No.
Channel No.
-
Narrow: "n", Wide: "w"
-
-
"FNC" appears
Key
Function
[S]
High power / Low power
[A]
Function off
[B]
Compander on/off
[C]
Beat shift on/off
[ ]/[ ]
Function off
[ ]/[ ]
Function off
[
]
Squelch level 0
[■]
LCD all lights
Microphone key
[PTT]
Transmit
[0] to [9]
and [A],
[B], [C],
Function off
[D], [#],
[ * ]
Note:
If a [S], [A], [B], [C] key is pressed during transmission, the DTMF
corresponding to the key that was pressed is sent.
• LED indicator
Red LED
Lights during transmission.
Green LED
Lights when there is carrier.
• Sub LCD indicator
"FNC"
Appears at function on.
• LCD display in panel test mode
n
1
n : Narrow
Channel No.
w : Wide
■ Frequency and Signaling
The transceiver has been adjusted for the frequencies
shown in the following table. When required, readjust them
following the adjustment procedure to obtain the frequen-
cies you want in actual operation.
• Test frequency
CH
RX (MHz)
1
243.55000
2
217.05000
3
269.95000
4
243.50000
5
243.70000
6
243.90000
7~16
-
TK-7185
Display
Low:
icon appears
-
On:
icon appears
On:
icon appears
-
-
On:
icon appears
LCD all point appears
-
-
1
Signaling No.
TX (MHz)
243.60000
217.10000
269.90000
243.50000
243.70000
243.90000
-
15

Hide quick links:

Advertisement

loading