Kenwood NX-900 Service Manual page 51

Radio Check Section
Item
Panel test mode
1. Frequency 1) CH-Sig: 1-1
check PTT: ON
2. High 1) CH-Sig: 2-1
power PTT: ON
check
2) CH-Sig: 2-1 (TA)
PTT: ON
3. Low 1) CH-Sig: 2-1
power PTT: ON
check
2) CH-Sig: 2-1 (TA)
PTT: ON
4. MIC 1) CH-Sig: 1-1
sensitivity AG: 1kHz
check PTT: ON
ADJUSTMENT
Condition
PC test mode
equipment
1) Test Channel f. counter
Channel: 1
Test Signaling
Mode: Analog
Signaling: 1
PTT: Press
[Transmit] button.
1) Test Channel Power
Channel: 2 meter
Test Signaling Ammeter
Mode: Analog
Signaling: 1
PTT: Press
[Transmit] button.
2) Test Channel
Channel: 2
Test Signaling
Mode: Analog
Signaling: 1
Talk Around: Check
PTT: Press
[Transmit] button.
1) Test Channel
Channel: 1
Test Signaling
Mode: Analog
Signaling: 1
PTT: Press
[Transmit] button.
2) Test Channel
Channel: 2
Test Signaling
Mode: Analog
Signaling: 1
Talk Around: Check
PTT: Press
[Transmit] button.
1) Test Channel Deviation
Channel: 1 meter
Test Signaling Oscilloscope
Mode: Analog AG
Signaling: 1 AF VTVM
AG: 1kHz
PTT: Press
[Transmit] button.
Measurement
Test-
Unit Terminal Unit
ANT
NX-900
Adjustment
Specifi cations /
Parts Method
Check 806.049194~
806.050806MHz
(±1.0ppm
@806.05MHz)
Check 12W~18W
9.0A or less
4.0W~6.0W
5.0A or less
Adjust AG input Dev: 3kHz at
to get a standard 5mV±1.5mV
MOD.
Remarks
51