Installing The Dual Band Bda; Unpacking; Required Tools And Materials - Dekolink Deko3178B Product Manual

D W L .
EKOLINK IRELESS TD
3 3 3 3 INSTALLING THE

INSTALLING THE DUAL BAND BDA

INSTALLING THE INSTALLING THE
3.1 U
NPACKING
Upon receiving the Deko3178B unit, perform the following:
Examine the shipping container for damage before unpacking the unit.
1.
Perform a visual inspection to reveal any physical damage to the
2.
equipment.
Verify that all of the equipment (listed below) is included. Otherwise
3.
contact Dekolink Wireless Ltd.
The Deko3178B Dual Band BDA is shipped with the following equipment:
Deko3178B Dual Band BDA - Model: MW-CBDA-SMR700-800-16W80
•
Key (used to lock the Dual Band BDA case)
•
AC supply cable [6 ft.]
•
User Manual (CD)
•
Packaging box
•
3.2 R
EQUIRED
A standard professional tool box is required in order to mount the Deko3178B Dual Band
BDA Mounting the Deko3178B
To mount the Dual Band BDA on the wall
1. Choose the location of the Dual Band BDA on the wall according to the following
criteria:
The location should be at normal eye level height, above ground.
•
Make sure that there is enough room to allow the door to swing completely
•
open, and to enable easy access to the Dual Band BDA for maintenance and on-
site inspection.
2. Mark the drilling holes on the wall surface based on the Dual Band BDA four
mounting holes. See following figure.
Pub. 300TC80031 Rev. 1.55
C B -D
OMPACT I IRECTIONAL
DUAL BAND BDA
DUAL BAND BDA DUAL BAND BDA
T M
OOLS AND ATERIALS
Proprietary Data
A D 3178B
MPLIFIER EKO
P M
RODUCT ANUAL
Page 13