LG W2600V User Manual page 19

On Screen Display(OSD) Selection and Adjustment
Main menu
SETUP
RGB/DVI input
HDMI input
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
If this does not improve the screen image, restore the factory default settings. If necessary,
perform the white balance function again. This function will be enabled only when the input
signal is an analog signal.
Sub menu
LANGUAGE To choose the language in which the
control names are displayed.
OSD
To adjust position of the OSD window
POSITION
on the screen.
WHITE If the output of the video card is different
BALANCE
the required specifications, the color
level may deteriorate due to video signal
distortion. Using this function, the signal
level is adjusted to fit into the standard
output level of the video card in order to
provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for RGB/DVI input)
To select the range of output image for
OVERSCAN
DTV timing in HDMI input.
(only for HDMI input)
POWER
Use this function to set the power
INDICATOR
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
FACTORY
"LANGUAGE."
RESET
Press the
17
Description
, buttons to reset immediately.