Troubleshoot - HOBBYMATE D6 Duo Pro Operating Instructions Manual

Troubleshoot

1. Error in power on self-testing: the charger can automatically carry out a self-testing when
connected to a power supply. A self-testing error warning sound should be heard when the
charger is connected to the battery; power on after removing the battery for 5 minutes. Do
not insert the battery in the self-test, please do other operations after the completion of
self-test.
2. Error for abnormal battery connection: pull out and plug in the battery again to ensure all
connections are reliably contacted; if the error reminder continues, please check whether the
metal parts on the battery interface are oxidized or burned resulting in unreliable connection.
Safety Tips
Please do not charge/store the battery of the following types of batteries from different
manufacturers, different models, different types and different capacity unrechargeable battery.
Cannot confirm the type or parameters of the battery
Batteries with special requirements for charging technology
Damaged or defective batteries
Battery with a built-in combination or protection circuit
Battery installed in other equipment or connected to other components
The rechargeable battery suitable for carrying current of this charger has not been confirmed
by the manufacturer
D6 Duo Pro AC/DC Dual Channel Smart Charger
19