Nokia 1315 User Manual page 44

N1315_UG_EN_Non-RUIM_Vivo_FCC_0804.fm Page 43 Friday, August 4, 2006 6:02 PM
Save information
1. Select Menu > Settings
2. Enter your security code, and select OK.
3. Scroll to one of the four memory locations, and select
Dialing sequence .
4. Select one of the following sequence types:
Access no. + phone no. + card
card number and PIN, if required.
Access no. + card no. + phone
if required, then phone number.
Prefix + phone no. + card
phone number) and phone number you want to dial, then the card number
and PIN, if required.
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name.
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. Select Menu > Settings
2. Enter your security code, and select OK. (See "Change the security code,"
page 51.)
3. Scroll to the calling card of your choice, and select
4. Press the end key to return to the standby mode; then enter the phone
number, including any prefix (such as 0 or 1) that your calling card may
require when you make a calling card call. See your calling card for
instructions.
5. Press and hold the call key for a few seconds until
6. When you hear the tone or system message, select OK.
> Call settings > Calling card.
Options
no.—Dial access number, phone number, then
no.—Dial access number, card number and PIN,
no.—Dial the prefix (numbers that must precede the
> Call settings > Calling card.
Options
Card call
S e t t i n g s
> Edit > OK >
> Select.
is displayed.
43