Table of Contents
Advertisement
N1315_UG_EN_Non-RUIM_Vivo_FCC_0804.fm Page 33 Friday, August 4, 2006 6:02 PM
4. Refer to dialing codes, and enter any codes as necessary using the
information that you saved from "Write down number and process," page 32.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice after the voice mailbox number, for example, 2145551212pp.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
Automate voice mail
You can automate voice mail with dialing codes. For more information, see "Save
voice mail dialing code," page 32
■ Picture messages
Picture messaging is a network service. If your wireless service provider supports
this feature, your phone comes with five preloaded pictures. Pictures can be
attached to a message and sent using text messaging to compatible phones.
Picture messages behave the same as text messages, but pictures take up more
space than text. Pictures are stored in the
Messages
>
Text messages
Note: Picture message function can be used only if it is supported by
your network operator or service provider. Only compatible devices that
offer picture message features can receive and display picture messages.
Copyright protections may prevent some images, music (including ringing tones)
and other content from being copied, modified, transferred, or forwarded.
Write and send
When a picture is added to a text message, the message converts to picture
message. The message counter in the upper right of your display shows the
characters available for you to type in.
1. Select
Menu
>
Messages
2. Write a message (or enter nothing if you choose to just send a picture), and
select Options.
Templates
folder at
> Templates.
>
Text messages
>
Create
message.
M e s s a g e s
Menu
>
33
Advertisement
Table of Contents
