Waiting; Connect; Disconnect; Volume Up And Down - LG HBM-730 User Manual

Hide thumbs Also See for HBM-730:

Table of Contents

LG Electronics Inc.

V. Waiting

Waiting Mode is also called "Standby Mode".

In this mode, you can make a Bluetooth connection with the headset in the registered phone.

You can connect to the registered device using the buttons of the headset.

VI. Connect

Pressing the Power/Call button without any Bluetooth device connected will connect to the most recently

connected device. The connection will try the hands-free profile and the headset profile at the same time.

If a connection fails, enter the Pairing Mode and try making a connection again.

[When the headset is successfully connected to a phone with the hands-free profile]

After entering Voice Dial Mode by pressing the Power/call button, a connection can be made with a phone

supporting Voice Dial. Press the button again to return to the main screen.

Press and hold the Power/Call button for two seconds. After a beep is heard, the headset will enter the Redialing

mode and call the most recently dialed number. For Some phones, this needs to be done twice for Redialing Mode.

Hang up the phone to end a call.

VII. Disconnect

If you wish to disconnect a Bluetooth connection, it is recommended that you use the menus of the phone.

VIII. Volume Up and Down

You can adjust the volume using the VOLUME UP or VOLUME DOWN buttons.

There are a total of 7 volume levels.

IX. Mute (the other party cannot hear the speaker)

For Mute, press and hold the VOLUME DOWN button for 1 second until double beep sounds are heard when

Table of Contents