Calling; Answering A Call; Making A Call; Voice Dialing - LG HBM-900 User Manual

How to use

Calling

Answering a call

- When there is an incoming call, the Headset will ring.
- Briefly touch the CALL button to answer an incoming call.

Making a call

- If you make a call from the handset, the call will (subject to phone
settings) automatically transfer to the Headset. If the call is not
automatically transferred, you can manually transfer the call by briefly
touching the CALL button on the HBM-900 (Headset and handset
must be paired).

Voice dialing*

- Briefly touch the CALL button to activate "Voice Command". You will get
the best results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible that
performing this action will activate Last Number redial.

Last number redial*

- Touch and hold the CALL button for 1second to activate "Last Number
Redial". The Headset will beep, and call the last number dialed.

Ending a call

- Briefly touch the CALL button.

Transferring a call*

- While on a call on your handset, briefly touch the CALL button to transfer
the audio to the Headset.(Headset and handset must be paired).
- To transfer a call from the Headset to handset, press and hold VOLUME
button for 3 seconds.

Call waiting*

- Answer a second call without hanging up the first call by touching the
CALL button for 1second. Touch the CALL button for 1second to return
to the original call.
- Briefly touch the CALL button to terminate the active call or both calls
at once. (subject to handset's support)
8

Call Reject*

- Activate Call Reject by touching the CALL button for 1second when
the handset rings.
* It is possible to use these functions only when your handset supports
them. For further information about using these features, please
consult your handset's user manual.

Multipoint

The LG HBM-900 is capable of having two handsets connected to the
Headset at the same time. This will give you the freedom of having only
one Headset to operate both of your handsets.

Multipoint Connect

- Pair the Headset with one of your Bluetooth-enabled handsets.
(per the pairing instructions on pages 5-6).
- Turn off the Headset.
- With the power off press and hold the Volume Control button and move
the PWR switch to ON position, to enter Manual Pairing mode. (you will
hear a tone).
- Now, pair and connect the Headset with your other Bluetooth-enabled
handset. (This will be your Primary handset).
- Once this handset is paired and connected, go back and connect the
first paired handset to Headset. (This will be your Secondary handset).
* Note: When the HBM-900 is connected to two handsets at the same
time(Multipoint), the Headset calling functions will work with the most
recently used handset.
Calling Functions (while in Multipoint)
- The Voice Dial and Last Number Redial features work with the Primary
handset. (most recently used handset).
- Initially, the first connected device is set as primary handset and the
next connected device is set as secondary handset.
- The device which made the last outgoing call will always be set as
the primary handset.
How to use
9