Warning And Safety Instructions - Kodak RVG 6500 IPS System Safety, Regulatory & Technical Specification User Manual

Hide thumbs Also See for RVG 6500 IPS System:
Table of Contents

Advertisement

Note:

Warning and Safety Instructions

Device:
Read and understand this Safety Information before using the
KODAK RVG 6500 with or withour IPS System.
This device complies with FCC and Industry Canada RF radiation
exposure limits set forth for general population (uncontrolled
exposure). This device must be installed to provide a separation
distance of at least 20cm from all persons and must not be
collocated or operating in conjunction with any other antenna or
transmitter.
You are responsible for the operation and maintenance of this
device. Only legally qualified persons can operate this device.
When necessary, have a trained authorized service technician
carry out inspection and maintenance operations.
Install this device in an X-ray room that complies with current
installation standards. From this location, you must be able to
maintain visual or audio communication with the patient and be
able to access the Acquisition interface module during exposure.
DO NOT operate the device if there is the threat of an
earthquake. Following an earthquake, ensure that the device is
operating satisfactorily before using it again. Failure to observe
this precaution may expose patients to hazards.
X-ray equipment is hazardous to patients and the operator if you
do not observe the exposure safety factors and operating
instructions.
DO NOT place objects within the field of operation of the device.
Connect this equipment ONLY to a mains power supply with
protective ground to avoid any risk of electric shock.
To dispose of the device or its components, contact a service
technician.
No modification of this equipment is allowed.
2
Chapter 1 Safety Information
Emphasizes important information.
WARNINGS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rvg 6500 system

Table of Contents