Setting The Backlight - Denso BHT-470BWB-CE Operator's Manual

28
Pressing the right-hand trigger switch (M4 key) with the SF key held down activates
or deactivates the backlight function.
In user programs, you can select the key to be used for activating or
deactivating the backlight function (instead of the initial setting:
combination of SF key and right-hand trigger switch ( M 4)), as well as
modifying the ON-duration of the backlight before the automatic
turning-off.
You can enable or disable the backlight function on the Backlight menu,
instead of pressing the backlight function on/off key. (For details, refer to
page 30.)

Setting the Backlight

Backlight Off or Dim
(The backlight function is
Disable when you turn
the BHT power on.)
Backlight On
If no key is
pressed for 3
seconds.*
Right -hand
trigger switch
(M4)
Backlight Off or Dim
(The backlight function
is Enable.)
SF key
*For one minute if the BHT is placed on the CU.
Press the
right-hand trigger
switch while
holding down SF.
Press the right -hand
trigger switch while
holding down SF.
Press any key (except for the
simultaneous depression of
the right -hand trigger switch
and SF) or tap the touch
screen.
Press the right -hand
trigger switch while
holding down SF.