Installation Instructions; Removing The Transit Devices 119 - AEG LAVAMAT 1050 VI Operating Instructions Manual

Installation instructions

All transit devices must be removed before installing and
connecting the appliance.
Proceed as follows:
Using a spanner, unscrew and remove the rear right-hand bolt.
back
P0255
Lay the machine on its back, taking care not to squash the hoses.
This can be avoided by placing one of the corner packing pieces
between the machine and the floor.
Remove the polystyrene base and take off the bottom panel by
unscrewing the central screw.
bottom
P0457
Carefully remove the right-hand bag.
bottom
P0015
Removing the
transit devices
119